Eaton 3kva E Series Online Double Conversion UPS

Be the first to review this product


Availability: In stock



Overview of Eaton 3kva E Series Online Double Conversion:

The E Series® DX UPS double-conversion UPS affordably protects mission critical applications from downtime, data loss and corruption. The double-conversion architecture incorporates rectifier and inverter stages to completely isolate the output power from all input anomalies. By adapting to a wide range of input voltages, the E Series DX avoids battery usage during minor power fluctuations, saving its capacity for times when utility power is completely lost.


  • Double conversion topology assures maximum reliability
  • Wide input-voltage range appropriate for the harshest electrical environments
  • Standard Models for fixed-run time performance
  • Tested for generator compatibility
  • Automatic bypass for fault-tolerance
  • Optional SNMP communications provides remote networkbased monitoring
  • XL Models for customised, long run-time applications, with fast recharging
  • Cold start on battery power allows portable power
  • WINPOWER software monitors power conditions
  • Intuitive front-panel user interface for consistent status indication
  • Topology: Online double-conversion IGBT with micro-controller
  • Configuration: Tower
  • Part Number: EDX3000HA
  • Rating (VA/Watts): 3000VA/2100W
  • Efficiency: >85%
  • UPS Bypass: In-Built Automatic Relay Bypass
  • Connection: IEC-320-C20
  • Input Voltage Range: 122V to 300V
  • Nominal Voltage: 220V
  • Voltage Range: 208/220/230/240V
  • Frequency: '50/60Hz, auto-detection
  • Frequency Range: 46Hz - 64Hz
  • Input Power Factor: > 0.95pf
  • Input Current Distortion: <30% THDi
  • Voltages: 208/220/230/240V
  • Nominal Voltage: 220V
  • Voltage Range: 208/220/230/240V
  • Output voltage regulation: ±2%
  • Output Receptacles: (4) IEC-320-C13,Hardwired - see manual for terminal block layout
  • Power Factor: 0.7
  • Output Frequency: 50 / 60Hz
  • Load Crest Factor: 3:1
  • Battery Description: Valve Regulated Lead Acid, AGM
  • Battery Type: 8x 12V, 7.2 Ah
  • Half Load Runtime (in mins): 16
  • Full Load Runtime (in mins): >5
  • Start On Battery: Unit can be started without being connected to AC utility power -- allows for portable power source
  • Recharge Time: < 5 hours to recover 90 percent of nominal backup
  • User Interface: Led's
  • LEDs: LED mimic diagram with 4 x LEDs for Utility, Bypass, Inverter & Battery Status,
  • Audible Alarms: Battery Operation Mode, Low Battery, General Fault, Overload, On Bypass
  • Communication Ports: 1 off Intelligent-Slot (Empty), 1 x RS232 DB9 Serial Port
  • Power Management Software: WINPOWER power management software, included on CD
  • Audible Noise: <50dB
  • Operating Temperature: 0°C to 40°C
  • Safety markings: CE
  • EMC Markings: IEC/EN 62040-2 Category C3
  • Markings: CE, C−Tick
  • Data Line Protection: Input / output jacks included for telephone / modem / internet line surge protection
  • Storage Temperature: 0°C to 40°C
  • Relative Humidity: 5 to 95%, no condensation allowed
  • Altitude: 1000m above sea level

Technical Details: 

  • Dimensions (H x W x D, mm): 340 x 192 x 460
  • Weight (kg): 35.5

Additional Information

NameEaton 3kva E Series Online Double Conversion UPS

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Custom Tab 1

Sample Block Here ...

A sample of additional collateral tabs that you can insert in static the backend.

Custom Tab N

Sample Block Here ...

A sample of additional collateral tabs that you can insert in static the backend.

You may also be interested in the following product(s)

There are no products matching the selection.

Write Your Own Review

You're reviewing: Eaton 3kva E Series Online Double Conversion UPS

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars