Cisco Catalyst WS-C2960X-48FPD-L Ethernet Switch


Overview of Cisco Catalyst 2960X 48FPD LAN Base Switches:

Cisco Catalyst 2960X-48FPD-L switches are fixed-configuration Fast Ethernet switches that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, and infrastructure applications. They enable reliable and secure operations with lower total cost of ownership through a range of Cisco IOS software features, including Cisco Catalyst SmartOperations.

WS- C2960X-48FPD-s is one of the Cisco Catalyst 2960 Series switches. This series support voice, video, data, and highly secure access. They also deliver scalable management as your business needs change. The Common Features are included: Enhanced security including Cisco TrustSec for providing authentication, access control, and security policy administration, Multiple Fast or Gigabit Ethernet performance options, Cisco EnergyWise for power management, Scalable network management.

Cisco Catalyst 2960-X series switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications. Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure and energy-efficient business operations.


  • 48 Gigabit Ethernet ports with line-rate forwarding performance

  • Gigabit Small Form-Factor Pluggable (SFP) uplinks

  • Power over Ethernet Plus (PoE+) support with up to 740 W of PoE budget

  • Reduced power consumption and advanced energy management features

  • USB and Ethernet management interfaces for simplified operations

  • Application visibility and capacity planning with integrated NetFlow-Lite


Key Specifications

  • Device Type: Switch - 48 ports - Managed - stackable

  • Enclosure Type: Rack-mountable 1U

  • Subtype: Gigabit Ethernet

  • Ports: 48 x 10/100/1000 (PoE+) + 2 x 10 Gigabit SFP+

  • power Over Ethernet (PoE) : PoE+

  • PoE Budget: 740 W

  • Performance: Switching capacity: 216 Gbps ¦ Forwarding performance (64-byte packet size): 107.1 Mpps

  • Capacity: Virtual interfaces (VLANs): 1023

  • Jumbo Frame Support: 9216 bytes

  • Processor: 600 MHz
  • RAM: 512 MB
  • Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI

  • Features: Layer 2 switching, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Intrusion Detection System (IDS), IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, RADIUS support, SSH support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (CoS), Cisco FlexStack Plus.

  • Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX

  • Power: AC 120/230 V (50/60 Hz)

  • Power Redundancy: Optional

  • Dimensions (WxDxH): 44.5 cm x 36.8 cm x 4.5 cm



More Information
Product NameCisco Catalyst WS-C2960X-48FPD-L Ethernet Switch
Write Your Own Review
You're reviewing:Cisco Catalyst WS-C2960X-48FPD-L Ethernet Switch
Your Rating
(c)2020 Kara Nigeria. All Rights Reserved. Powered by